P.O. BOX 17062 -. CLEARWATER, FL 33762
PH. 1-727-789-5786 FAX 1-727-572-9926
PH. 1-727-789-5786 FAX 1-727-572-9926
www.floridawaterblast.net
Search for Products
WATER JETTING
... Ultra High Pressure Bare Shaft Pumps - Up To 40,000 PSI
|
Specifications/Performance |
|
| ||||||||
|
RPM |
|
|
|
|
200 RPM |
200 RPM |
400 RPM |
400 RPM |
600 RPM |
600 RPM |
|
MODEL |
MAWP PSI |
MAWP Bar |
Plunger In. |
Plunger mm |
FLOW GPM |
FLOW LPM |
FLOW GPM |
FLOW LPM |
FLOW GPM |
FLOW LPM |
|
T-300M |
15,000 |
1034 |
0.750 |
19 |
3.4 |
12.9 |
6.8 |
25.9 |
10.3 |
39.0 |
|
T-300M |
11,500 |
793 |
0.875 |
22 |
4.7 |
17.8 |
9.4 |
35.6 |
14.1 |
53.0 |
|
T-300M |
10,000 |
690 |
0.945 |
24 |
5.5 |
21.0 |
10.9 |
41.0 |
16.4 |
62.0 |
|
T-300M |
8,000 |
552 |
1.000 |
25 |
6.1 |
23.1 |
12.2 |
46.2 |
18.4 |
69.6 |
|
T-300H |
20,000 |
1379 |
0.650 |
17 |
2.6 |
9.8 |
5.1 |
19.5 |
7.7 |
29.3 |
|
T-300UH |
40,000 |
2758 |
0.472 |
12 |
1.3 |
4.92 |
2.7 |
10.2 |
4.0 |
15.1 |
Design Advantages
|
·
|
High volumetric efficiency for maximum horsepower;
|
|
·
|
Maximum frame load of 7,000 lbs./3178 Kg;
|
|
·
|
Field proven design;
|
|
·
|
Extremely reliable - thousands in service in a wide variety of environments world wide.world wide;
|
|
·
|
Easy field maintenance with common tools;
|
|
·
|
Rigorously subjected to full load testing;
|
|
·
|
Available with all stainless steel fluid ends;
|
|
·
|
Suction manifold is available in hard, anodized aluminum or stainless steel;
|
|
·
|
Discharge manifold is manufactured from precipitation hardened stainless steel;
|
|
·
|
Plungers and packing easily replaced from the rear of the stuffing box;
|
|
·
|
Force-fed water provides lubrication and cooling;
|
|
·
|
Crankshaft made from double extended cast alloy steel with tapered roller bearings to minimize side thrust load;
|
|
·
|
Bearings and crossheads are oil lubricated with a combined splash gravity system that insures adequate circulation at
|
speeds as low as 200 RPM.
T-300M/H/UH Bareshaft Waterjetting Pumps
Compact, Powerful and Cost Efficient Water Jetting Pumps - Pressures
to 40,000 PSI, Flows to 18 GPM, Power to 100 HP
to 40,000 PSI, Flows to 18 GPM, Power to 100 HP
The Gardner Denver "T Series" triplex bareshaft
water jetting pumps have been in production for
over 30 years and still going strong. You will find
these reliable little pumps on the 100 Series Units.
They are an ideal, economical "first pump" for
most contractors. T-300M for 15,000 PSI -The
T-300M features the "L" fluid end design, which
performs at pressures from 8,000 to 15,000 PSI,
and flows from 10.3 to 18.4 GPM. Four different
plunger sizes allow this pump to adapt to the
specific flow and pressure requirements for each
job. T-300H for 20,000 PSI - The T-300H inline
fluid end reliably covers the pressure range from 15,000 to 20,000. Depending on the plunger set
installed, the T-300H will deliver flows from 7.7 GPM to 10.3 GPM. All fluid cylinders and valve
assemblies are autofrettaged for durability. T-300UH for 40,000 PSI - The T-300UH inline fluid
end reliably covers the pressure range to 40,000 and will deliver flows from 1.3 GPM to 4.0 GPM
depending on the RPMs. All fluid cylinders and valve assemblies are autofrettaged for durability
water jetting pumps have been in production for
over 30 years and still going strong. You will find
these reliable little pumps on the 100 Series Units.
They are an ideal, economical "first pump" for
most contractors. T-300M for 15,000 PSI -The
T-300M features the "L" fluid end design, which
performs at pressures from 8,000 to 15,000 PSI,
and flows from 10.3 to 18.4 GPM. Four different
plunger sizes allow this pump to adapt to the
specific flow and pressure requirements for each
job. T-300H for 20,000 PSI - The T-300H inline
fluid end reliably covers the pressure range from 15,000 to 20,000. Depending on the plunger set
installed, the T-300H will deliver flows from 7.7 GPM to 10.3 GPM. All fluid cylinders and valve
assemblies are autofrettaged for durability. T-300UH for 40,000 PSI - The T-300UH inline fluid
end reliably covers the pressure range to 40,000 and will deliver flows from 1.3 GPM to 4.0 GPM
depending on the RPMs. All fluid cylinders and valve assemblies are autofrettaged for durability
FLORIDA WATER BLAST, INC. Clearwater Florida Ph. 1-727-789-5786
